@echo off
mode con cols=70 lines=15
title ★本命令复制文件和文件夹★
setlocal enabledelayedexpansion
::=================================主程序1=================================
:pk
cls
echo.
echo.
echo.
echo             ▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
echo           ▕本命令复制文件和文件夹，速度快，重复的跳过▏
echo             ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
echo.
echo.
echo  说明：某些系统需要把程序放到桌面上才能运行
echo.
set yes=3
set yes2=0
echo ★第一步★指定要复制的文件或者文件夹
echo.
set/p "file1=→→拖入要复制的文件夹："
if not defined file1 goto :pk
set "pppp1=%file1:"=%"
if "%pppp1%" equ " " goto :pk
set "pppp1=%pppp1:&=^&%"
set "file1="%pppp1%""
echo.
echo.
if not exist %file1% goto :pk
pushd %file1% 2>nul&&set yes=1||set yes=0
popd 
if %yes% equ 1 (
echo ■要复制的为■：文件夹-%file1% 
)
if %yes% equ 0 ( 
echo ■要复制的为■：文件-%file1%
)



::=================================主程序2=================================
:ak2
echo.
echo.
echo ★第二步★指定要复制到哪里？
echo.
set/p "file2=→→拖入复制到何处："
set "pppp2=%file2:"=%"
set "pppp2=%pppp2:&=^&%"
set "file2="%pppp2%""
pushd %file2% 2>nul&&set yes2=1
popd  
if %yes2% equ 0 echo 错误 &goto :ak2
::=================================主程序3=================================
cls
echo.
echo  稍后，正在初始化……

if %yes% equ 0 goto :bu2
call :panduan
start /min  /i cmd /c "(robocopy /e /ns /nc "%pppp1%" "%pppp2%" )" 
call :jindutiao
echo 完成！&pause>nul
exit


:bu2
set "route=%file1:"=%"
call :fenli
md "%route%\%filenamek%"
move %file1% "%route%\%filenamek%"
set "pppp=%route%\%filenamek%"
set "pppp=%pppp:&=^&%"
call :panduan
start /min  /i cmd /c "(robocopy /e /ns /nc "%pppp%" "%pppp2%" )"
call :jindutiao
move "%route%\%filenamek%\%filename%" "%route%" 2>nul 
rd "%route%\%filenamek%" 2>nul
echo 完成！&pause>nul
exit
goto :eof

::=================================路径提取名字和路径的程序=================================
:fenli
set filenamek=
set filename=
:separate2
if not "%route:~-1%"=="\" (
    set "filenamek=%route:~-1%%filenamek%"
    set "route=%route:~0,-1%"
    goto separate2
    ) 
set "route=%route:~0,-1%"
set  "filename=%filenamek%"
set  "filenamek=%filenamek:~0,-4%"
goto :eof



::=================================判断robocopy程序=================================
:panduan
set /a numh=0
set hand_0=0
set hand_1=0
set hand_2=0
for /f "tokens=1,2* delims==" %%i in ('wmic process where name^="robocopy.exe" get Handle /value 2^>nul^|findstr "Handle" ') do (  
set /a numh+=1
set hand_!numh!=%%j  
) 2>nul
goto :eof

::=================================进度条程序1-获取当前程序句柄=================================
:jindutiao
set hand=0
for /f "tokens=1,2* delims==" %%i in ('wmic process where name^="robocopy.exe" get Handle /value 2^>nul^|findstr "Handle" ') do (  
if %%j neq %hand_0% (
if %%j neq %hand_1% (
if %%j neq %hand_2% (
set hand=%%j
goto:out3
)
)
)
)
:out3
if %hand% equ 0 (cls&echo.&echo.&echo 警告！robocopy命令没有启动！任意键退出程序！&pause&goto :eof)


::=================================进度条程序2-初始化程序=================================
mode con cols=60 lines=10
color 1f
set    jindu=
set    daxiao=0000000
set /a jindu1=0
for /f "tokens=3" %%i in ('dir /a /s /-c %file1%^|findstr "个文件"') do (set daxiao2=%%i )
set /a all=%daxiao2:~0,-6%
set    daxiao=

:begain2
set daxiao=00
set jindu=
for /f "tokens=1,2* delims==" %%i in ('wmic process where Handle^="%hand%" get WriteTransferCount /value 2^>nul^|findstr "WriteTransferCount"') do (  
set daxiao=%%j 
goto :outp
) 2>nul
:outp
if "%daxiao%" equ "00" (
if %yes% equ 0 (
move "%route%\%filenamek%\%filename%" "%route%"
rd "%route%\%filenamek%"
)
echo 警告！robocopy命令已经关闭！是否已完成！
pause>nul
goto :eof
)


call :jisuan


::=================================进度条程序2-显示程序=================================

for /l %%i in (0 5 %jindu1%) do (
set "jindu=!jindu!▉"
)
title 进度:%jindu1%﹪ 
cls
echo                      Robocopy复制进度
ECHO.
echo 容量进度（M）： %daxiao:~0,-1% / %all:~0,-1%
echo.
echo                        百分进度:%jindu1%﹪
echo          ▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
echo          %jindu%  
echo          ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
if %jindu1% gtr 95 color 4E
timeout /t 1 1>nul


if %jindu1% equ 100 (title 警告！&goto :eof) 
goto :begain2
goto :eof



::=================================进度条程序3-计算进度程序=================================
:jisuan
set num=
set dec_str=
set /a daxiao=%daxiao:~0,-7% 
if "%daxiao%" equ "" set daxiao=1 
set input=%daxiao% %all% 2 
for /f "delims=" %%i in ("%input%") do call :count %%i
goto :eof


:count
set /a int_str=%1/%2 
set /a mod=%1%%%2 
if %mod% equ 0 goto :hao
:count_dec
set mod=%mod%0
if %mod% lss %2 (
   set dec_str=!dec_str!0
    goto count_dec
) else (
    set /a dec=%mod%/%2
    set dec_str=!dec_str!!dec!
    set /a mod=%mod%%%%2 
)
set /a num+=1 
if %mod% neq 0 if %num% lss 2 goto count_dec
:hao
if %int_str% geq 1 (set /a jindu1=100 &goto :eof)
if "!dec_str:~0,1!" equ "0" (
if "!dec_str:~1,1!" equ "0" (set /a jindu1=1 &goto:eof)
set /a jindu1=!dec_str:~1,1! 
) 
set /a jindu1=!dec_str:~0,2! 
goto :eof
 
复制代码