[其他] 批处理如何安装网络打印机

飛雪

因單位有大量的XP、7機器有此需求

還要勞煩前輩指教了

感激不盡...

yu2n

这是我正在用的，驱动共享路径、IP端口等需要自己按实际情况修改

' ====================================================================================================
Dim WhoAmI, TmpDir, WinDir, AppDataDir, MeDir :    Call GetGloVar()    ' 初始化全局变量


' 加密自身
Call MeEncoder()

' 重复运行则退出
If MeIsAlreadyRun() = True Then WScript.Quit

' 非XP系统退出
If Not LCase(OSVer()) = "xp" Then WScript.Quit



' 是否映射网络
If Not Exist(strDriverPath & "") Then
	ErrorInfo "错误：不能连接网络驱动器", "找不到 \\texdgntf\div$\PRINT ！ 请连接后重试！", 3
	WScript.Quit
End If



' 取消安装未签名驱动的提示，安装时忽略未签名的驱动程序
Call DriverSigningIagree()


' 取得当前打印机列表
PrintList_1 = ShowPrint(".")


' ====================================================================================================
' vbs脚本自动安装打印机
'-------------------------------------------------------------------------------'
'--------------------------查看和添加远程网络打印机-----------------------------'
'   注意：需要有对方管理员权限'
'-------------------------------------------------------------------------------'
' strComputer = InputBox("PC NAME 你要添加打印机的电脑的名称")
strComputer = "."
strDriverPath = "\\server03\driver$\print"


' 添加驱动
add_driver strComputer, "HP LaserJet 2200 Series PCL 6", strDriverPath & "\HP2200\WIN2000\PCL6", strDriverPath & "\HP2200\WIN2000\PCL6\HPBF322I.INF"
add_driver strComputer, "HP LaserJet 2300 Series PCL 6", strDriverPath & "\HP2300", strDriverPath & "\HP2300\hpc2300c.inf"
'add_driver strComputer, "hp LaserJet 1320 PCL 6", strDriverPath & "\HP1320\HP_LJ1320_PCL6_Driver", strDriverPath & "\HP1320\HP_LJ1320_PCL6_Driver\hpc1320c.inf"
'add_driver strComputer, "HP LaserJet 4350 PCL 6", strDriverPath & "\HP4350\HP4350_PCL6_Driver", strDriverPath & "\HP4350\HP4350_PCL6_Driver\hpc4x50c.inf"



' 添加端口
add_port strComputer, "192.168.118.233"
add_port strComputer, "192.168.118.234"
add_port strComputer, "192.168.118.235"
add_port strComputer, "192.168.118.236"
add_port strComputer, "192.168.118.237"



' 添加打印机
add_print_local "Epson LQ-2500C", "LPT1:", "Epson LQ-1170 ESC/P 2"
add_print_lcoal_inf "hp LaserJet 1320 PCL 6", strDriverPath & "\HP1320\HP_LJ1320_PCL6_Driver\hpc1320c.inf", "LPT1:", "hp LaserJet 1320 PCL 6"
add_print_lcoal_inf "HP LaserJet 4350 PCL 6", strDriverPath & "\HP4350\HP4350_PCL6_Driver\hpc4x50c.inf", "LPT1:", "HP LaserJet 4350 PCL 6"
'add_print strComputer, "HP LaserJet 2200 Series PCL 6", "LPT1:", "vdy4_laser", "工艺组"
add_print strComputer, "HP LaserJet 2200 Series PCL 6", "LPT1:", "vdy4_laser", ""
add_print strComputer, "HP LaserJet 2200 Series PCL 6", "LPT1:", "job_laser", ""
add_print strComputer, "HP LaserJet 2200 Series PCL 6", "LPT1:", "HP LaserJet 2200 Series PCL 6", ""
add_print strComputer, "HP LaserJet 2300 Series PCL 6", "LPT1:", "HP LaserJet 2300 Series PCL 6", ""


' 恢复安装未签名驱动的提示，安装时提示未签名的驱动程序
Call DriverSigningWarning()



' 显示完成信息
PrintList_2 = ShowPrint( "." )
If PrintList_1 <> "" Then
	PrintList_1_arr = Split( PrintList_1, VbCrLf, -1, 1)
	PrintList_2_arr = Split( PrintList_2, VbCrLf, -1, 1)
	For I = 0 To UBound( PrintList_2_arr )
		For J = 0 To UBound( PrintList_1_arr )
			If PrintList_2_arr( I ) = PrintList_1_arr( J ) Then
				PrintList_2_arr( I ) = ""
				Exit For
			End If
		Next
	Next
	For I = 0 To UBound( PrintList_2_arr )
		If PrintList_2_arr( I ) <> "" Then ChangePrintList = ChangePrintList & VbCrLf & PrintList_2_arr( I )
	Next
	'ChangePrintList = Join( PrintList_2_arr, VbCrLf )
	'ChangePrintList = ReplaceTest( ChangePrintList, "\s*", VbCrLf )
Else
	ChangePrintList = PrintList_2
End If

TipInfo "提示：安装完成", ChangePrintList, 30
WScript.Quit



' ====================================================================================================
'添加驱动。不支持2000以下下操作系统。包括2000
Sub add_driver( strComputer, DriverName, DriverFolderPath, DriverConfigFilePath )
	Set shell = WScript.createObject("wscript.shell")
	shell.run "cmd.exe /c cscript %windir%\system32\prndrvr.vbs -a -m """ & DriverName & """ -s " & strComputer & " -h """ & DriverFolderPath & """ -i """ & DriverConfigFilePath & """", 0, true
	Set shell = Nothing
End Sub

' ====================================================================================================
'添加端口'
Sub add_port( strComputer, strIPAddress )
	On Error Resume Next
	Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate,(LoadDriver)}!\\" & strComputer & "\root\cimv2")
	Set objNewPort = objWMIService.Get("Win32_TCPIPPrinterPort").SpawnInstance_
	objNewPort.Name = "IP_" & strIPAddress
	objNewPort.Protocol = 1
	objNewPort.HostAddress = strIPAddress
	objNewPort.PortNumber = "9100"
	objNewPort.SNMPEnabled = False
	objNewPort.SNMPCommunity = "Public"
	objNewPort.Put_
	Set objNewPort = Nothing
	Set objWMIService = Nothing
End Sub

' ====================================================================================================
'添加打印机
Sub add_print( strComputer, DriverName, PortName, PrintName, Location )
	On Error Resume Next
	Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate,(LoadDriver)}!\\" & strComputer & "\root\cimv2")
	Set objPrinter = objWMIService.Get("Win32_Printer").SpawnInstance_
	objPrinter.DriverName = DriverName
	objPrinter.PortName   = PortName
	objPrinter.DeviceID   = PrintName
	objPrinter.Location = Location
	objPrinter.Network = True
	objPrinter.Put_
	Set objPrinter = Nothing
	Set objWMIService = Nothing
End Sub
Sub add_print_local( DriverName, PortName, PrintName )
	On Error Resume Next
	Set shell = WScript.createObject("wscript.shell")
	shell.run "rundll32 printui.dll,PrintUIEntry /if /b """ & PrintName & """ /f """ & DriverConfigFilePath & """ /r """ & PortName & """ /m """ & DriverName & """ /z", 1, true
	Set shell = Nothing
End Sub
Sub add_print_lcoal_inf( DriverName, DriverConfigFilePath, PortName, PrintName )
	On Error Resume Next
	Set shell = WScript.createObject("wscript.shell")
	shell.run "rundll32 printui.dll,PrintUIEntry /if /b """ & PrintName & """ /f """ & DriverConfigFilePath & """ /r """ & PortName & """ /m """ & DriverName & """ /z", 1, true
	Set shell = Nothing
End Sub

' ====================================================================================================
'显示打印机
Function ShowPrint( strComputer )
	On Error Resume Next
	Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate,(LoadDriver)}!\\" & strComputer & "\root\cimv2")
	Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_Printer")
	For Each print_list in colItems
		ShowPrint = ShowPrint & print_list.DeviceID & VbCrLf
	Next
	Set colItems = Nothing
	Set objWMIService = Nothing
End Function


' ====================================================================================================
' 安装时忽略未签名的驱动程序
Sub DriverSigningIagree()
    Set wso = WScript.CreateObject("WScript.Shell")
    Sleep 200
    Call RunNotWait( "rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,2" )
    Do While i < 35    ' 在 7 秒内执行，35*200 = 7*1000
        i = i + 1
        If (AppActivate("系统属性") = True) Or (AppActivate("系統內容") = True) Then
            Sleep 100
            SendKeys "%S"
            Sleep 100
            If (AppActivate("驱动程序签名选项") = True) Or AppActivate("驅動程式碼簽署選項") = True Then
                Sleep 100
                SendKeys "%I"
                Sleep 100
                SendKeys "{ENTER}"
                Sleep 100
                SendKeys "{ESC}"
                Exit Do
            Else
                SendKeys "{ESC}"
            End If
        End If
        Sleep 200
    Loop
    Set wso = Nothing
End Sub

' ====================================================================================================
' 安装时提示未签名的驱动程序
Sub DriverSigningWarning()
    Set wso = WScript.CreateObject("WScript.Shell")
    Sleep 200
    Call RunNotWait( "rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,2" )
    Do While i < 35    ' 在 7 秒内执行，35*200 = 7*1000
        i = i + 1
        If (AppActivate("系统属性") = True) Or (AppActivate("系統內容") = True) Then
            Sleep 100
            SendKeys "%S"
            Sleep 100
            If (AppActivate("驱动程序签名选项") = True) Or AppActivate("驅動程式碼簽署選項") = True Then
                Sleep 100
                SendKeys "%W"
                Sleep 100
                SendKeys "{ENTER}"
                Sleep 100
                SendKeys "{ESC}"
                Exit Do
            Else
                SendKeys "{ESC}"
            End If
        End If
        Sleep 200
    Loop
    Set wso = Nothing
End Sub


' ====================================================================================================
' ****************************************************************************************************
' *  公共函数
' *  使用方式：将本段全部代码加入程序末尾，将以下代码(1行)加入程序首行即可
' *            Dim WhoAmI, TmpDir, WinDir, AppDataDir, MeDir :   Call GetGloVar()   ' 初始化全局变量
' *  取得支持：电邮至 yu2n@qq.com
' *  更新日期：2012-11-30  11:35
' ****************************************************************************************************
' 功能索引
' 命令行支持：
'     检测环境：IsCmdMode是否在CMD下运行
'     模拟命令：Exist是否存在文件或文件夹、MD创建目录、Copy复制文件或文件夹、Del删除文件或文件夹、
'               Attrib更改文件或文件夹属性、Ping检测网络联通、
' 对话框：
'     提示消息：WarningInfo警告消息、TipInfo提示消息、ErrorInfo错误消息
'     输入密码：GetPassword提示输入密码、
' 文件系统：
'     复制、删除、更改属性：参考“命令行支持”。
'     INI文件处理：
'     注册表处理：RegRead读注册表、RegWrite写注册表
'     日志处理：WriteLog写文本日志
' 字符串处理：
'     提取：RegExpTest
' 程序：
'     检测：IsRun是否运行、MeIsAlreadyRun本程序是否执行、、、、
'     执行：Run前台等待执行、RunHide隐藏等待执行、RunNotWait前台不等待执行、RunHideNotWite后台不等待执行、
'     加密运行：MeEncoder
' 系统：
'     版本
'     延时：Sleep
'     发送按键：SendKeys
' 网络：
'     检测：Ping、参考“命令行支持”。
'     连接：文件共享、、、、、、、、、、
' 时间：Format_Time格式化时间、NowDateTime当前时间
' ====================================================================================================
' ====================================================================================================
' 小函数
Sub Sleep( sTime )                          ' 延时 sTime 毫秒
    WScript.Sleep sTime
End Sub
Sub SendKeys( strKey )                      ' 发送按键
    CreateObject("WScript.Shell").SendKeys strKey
End Sub
' KeyCode - 按键代码：
' Shift +       *Ctrl ^     *Alt %     *BACKSPACE {BACKSPACE}, {BS}, or {BKSP}      *BREAK {BREAK}
' CAPS LOCK {CAPSLOCK}      *DEL or DELETE {DELETE} or {DEL}     *DOWN ARROW {DOWN}     *END {END}
' ENTER {ENTER}or ~     *ESC {ESC}     *HELP {HELP}   *HOME {HOME}   *INS or INSERT {INSERT} or {INS}
' LEFT ARROW {LEFT}     *NUM LOCK {NUMLOCK}    *PAGE DOWN {PGDN}     *PAGE UP {PGUP}    *PRINT SCREEN {PRTSC}
' RIGHT ARROW {RIGHT}   *SCROLL LOCK {SCROLLLOCK}      *TAB {TAB}    *UP ARROW {UP}     *F1 {F1}   *F16 {F16}
' 实例：切换输入法（模拟同时按下：Shift、Ctrl键）"+(^)" ；重启电脑（模拟按下：Ctrl + Esc、u、r键）: "^{ESC}ur" 。
' 同时按键：在按 e和 c的同时按 SHIFT 键: "+(ec)" ；在按 e时只按 c（而不按 SHIFT）: "+ec" 。
' 重复按键：按 10 次 "x": "{x 10}"。按键和数字间有空格。
' 特殊字符：发送 “+”、“^” 特殊的控制按键："{+}"、"{^}"
' 注意：只可以发送重复按一个键的按键。例如，可以发送 10次 "x"，但不可发送 10次 "Ctrl+x"。  
' 注意：不能向应用程序发送 PRINT SCREEN键{PRTSC}。
Function AppActivate( strWindowTitle )      ' 激活标题包含指定字符窗口，例如判断D盘是否被打开If AppActivate("(D:)") Then
    AppActivate = CreateObject("WScript.Shell").AppActivate( strWindowTitle )
End Function


' ====================================================================================================
' ShowMsg 消息弹窗
Sub WarningInfo( strTitle, strMsg, sTime )
    CreateObject("wscript.Shell").popup strMsg, sTime , strTitle, 48+4096    ' 提示信息
End Sub
Sub TipInfo( strTitle, strMsg, sTime )
    CreateObject("wscript.Shell").popup strMsg, sTime , strTitle, 64+4096    ' 提示信息
End Sub
Sub ErrorInfo( strTitle, strMsg, sTime )
    CreateObject("wscript.Shell").popup strMsg, sTime , strTitle, 16+4096    ' 提示信息
End Sub

' ====================================================================================================
' RunApp 执行程序
Sub Run( strCmd )
    CreateObject("WScript.Shell").Run strCmd, 1, True       ' 正常运行 + 等待程序运行完成
End Sub
Sub RunNotWait( strCmd )
    CreateObject("WScript.Shell").Run strCmd, 1, False      ' 正常运行 + 不等待程序运行完成
End Sub
Sub RunHide( strCmd )
    CreateObject("WScript.Shell").Run strCmd, 0, True       ' 隐藏后台运行 + 等待程序运行完成
End Sub
Sub RunHideNotWait( strCmd )
    CreateObject("WScript.Shell").Run strCmd, 0, False      ' 隐藏后台运行 + 不等待程序运行完成
End Sub

' ====================================================================================================
' CMD 命令集
' ----------------------------------------------------------------------------------------------------
' ----------------------------------------------------------------------------------------------------
' 检测是否运行于CMD模式
Function IsCmdMode()
    IsCmdMode = False
    If (LCase(Right(WScript.FullName,11)) = LCase("CScript.exe")) Then IsCmdMode = True
End Function
' Exist 检测文件或文件夹是否存在
Function Exist( strPath )
    Exist = False
    Set fso = CreateObject("Scripting.FileSystemObject")
    If ((fso.FolderExists(strPath)) Or (fso.FileExists(strPath))) Then Exist = True
    Set fso = Nothing
End Function
' ----------------------------------------------------------------------------------------------------
' MD 创建文件夹路径
Sub MD( ByVal strPath )
    Dim arrPath, strTemp, valStart
    arrPath = Split(strPath, "\")
    If Left(strPath, 2) = "\\" Then    ' UNC Path
        valStart = 3
        strTemp = arrPath(0) & "\" & arrPath(1) & "\" & arrPath(2)
    Else                              ' Local Path
        valStart = 1
        strTemp = arrPath(0)
    End If
    Set fso = CreateObject("Scripting.FileSystemObject")
    For i = valStart To UBound(arrPath)
        strTemp = strTemp & "\" & arrPath(i)
        If Not fso.FolderExists( strTemp ) Then fso.CreateFolder( strTemp )
    Next
    Set fso = Nothing
End Sub
' ----------------------------------------------------------------------------------------------------
' copy 复制文件或文件夹
Sub Copy( ByVal strSource, ByVal strDestination )
    On Error Resume Next ' Required 必选
    Set fso = CreateObject("Scripting.FileSystemObject")
    If (fso.FileExists(strSource)) Then               ' 如果来源是一个文件
        If (fso.FolderExists(strDestination)) Then    ' 如果目的地是一个文件夹，加上路径后缀反斜线“\”
            fso.CopyFile fso.GetFile(strSource).Path, fso.GetFolder(strDestination).Path & "\", True
        Else                                          ' 如果目的地是一个文件，直接复制
            fso.CopyFile fso.GetFile(strSource).Path, strDestination, True
        End If
    End If                                             ' 如果来源是一个文件夹，复制文件夹
    If (fso.FolderExists(strSource)) Then fso.CopyFolder fso.GetFolder(strSource).Path, fso.GetFolder(strDestination).Path, True
    Set fso = Nothing
End Sub
' ----------------------------------------------------------------------------------------------------
' del 删除文件或文件夹
Sub Del( strPath )
    On Error Resume Next ' Required 必选
    Set fso = CreateObject("Scripting.FileSystemObject")
    If (fso.FileExists(strPath)) Then
        fso.GetFile( strPath ).attributes = 0
        fso.GetFile( strPath ).delete
    End If
    If (fso.FolderExists(strPath)) Then
        fso.GetFolder( strPath ).attributes = 0
        fso.GetFolder( strPath ).delete
    End If
    Set fso = Nothing
End Sub
' ----------------------------------------------------------------------------------------------------
' attrib 改变文件属性
Sub Attrib( strPath, strArgs )    'strArgs = [+R | -R] [+A | -A ] [+S | -S] [+H | -H]
    Dim fso, valAttrib, arrAttrib()
    Set fso = CreateObject("Scripting.FileSystemObject")
    If (fso.FileExists(strPath)) Then valAttrib = fso.getFile( strPath ).attributes
    If (fso.FolderExists(strPath)) Then valAttrib = fso.getFolder( strPath ).attributes
    If valAttrib = "" Or strArgs = "" Then Exit Sub
    binAttrib = DecToBin(valAttrib)   ' 十进制转二进制
    For i = 0 To 16                   ' 二进制转16位二进制
        ReDim Preserve arrAttrib(i) : arrAttrib(i) = 0
        If i > 16-Len(binAttrib) Then arrAttrib(i) = Mid(binAttrib, i-(16-Len(binAttrib)), 1)
    Next
    If Instr(1, LCase(strArgs), "+r", 1) Then arrAttrib(16-0) = 1   'ReadOnly 1 只读文件。
    If Instr(1, LCase(strArgs), "-r", 1) Then arrAttrib(16-0) = 0
    If Instr(1, LCase(strArgs), "+h", 1) Then arrAttrib(16-1) = 1   'Hidden 2 隐藏文件。
    If Instr(1, LCase(strArgs), "-h", 1) Then arrAttrib(16-1) = 0
    If Instr(1, LCase(strArgs), "+s", 1) Then arrAttrib(16-2) = 1   'System 4 系统文件。
    If Instr(1, LCase(strArgs), "-s", 1) Then arrAttrib(16-2) = 0
    If Instr(1, LCase(strArgs), "+a", 1) Then arrAttrib(16-5) = 1   'Archive 32 上次备份后已更改的文件。
    If Instr(1, LCase(strArgs), "-a", 1) Then arrAttrib(16-5) = 0
    valAttrib = BinToDec(Join(arrAttrib,""))   ' 二进制转十进制
    If (fso.FileExists(strPath)) Then fso.getFile( strPath ).attributes = valAttrib
    If (fso.FolderExists(strPath)) Then fso.getFolder( strPath ).attributes = valAttrib
    Set fso = Nothing
End Sub
Function DecToBin(ByVal number)    ' 十进制转二进制
   Dim remainder
   remainder = number
   Do While remainder > 0
      DecToBin = CStr(remainder Mod 2) & DecToBin
      remainder = remainder \ 2
   Loop
End Function
Function BinToDec(ByVal binStr)    ' 二进制转十进制
   Dim i
   For i = 1 To Len(binStr)
      BinToDec = BinToDec + (CInt(Mid(binStr, i, 1)) * (2 ^ (Len(binStr) - i)))
   Next
End Function
' ----------------------------------------------------------------------------------------------------
' Ping 判断网络是否联通
Function Ping(host)
    On Error Resume Next
    Ping = False :   If host = "" Then Exit Function
    Set objPing = GetObject("winmgmts:{impersonationLevel=impersonate}").ExecQuery("select * from Win32_PingStatus where address = '" & host & "'")
    For Each objStatus in objPing
        If objStatus.ResponseTime >= 0 Then Ping = True :   Exit For
    Next
    Set objPing = nothing
End Function

' ====================================================================================================
' 获取当前的日期时间，并格式化
Function NowDateTime()
    'MyWeek = "周" & Right(WeekdayName(Weekday(Date())), 1) & " "
    MyWeek = ""
    NowDateTime = MyWeek & Format_Time(Now(),2) & " " & Format_Time(Now(),3)
End Function
Function Format_Time(s_Time, n_Flag)
    Dim y, m, d, h, mi, s
    Format_Time = ""
    If IsDate(s_Time) = False Then Exit Function
    y = cstr(year(s_Time))
    m = cstr(month(s_Time))
        If len(m) = 1 Then m = "0" & m
    d = cstr(day(s_Time))
        If len(d) = 1 Then d = "0" & d
    h = cstr(hour(s_Time))
        If len(h) = 1 Then h = "0" & h
    mi = cstr(minute(s_Time))
        If len(mi) = 1 Then mi = "0" & mi
    s = cstr(second(s_Time))
        If len(s) = 1 Then s = "0" & s
    Select Case n_Flag
        Case 1
            Format_Time = y  & m & d  & h  & mi  & s    ' yyyy-mm-dd hh:mm:ss
        Case 2
            Format_Time = y & "-" & m & "-" & d    ' yyyy-mm-dd
        Case 3
            Format_Time = h & ":" & mi & ":" & s   ' hh:mm:ss
        Case 4
            Format_Time = y & "年" & m & "月" & d & "日"    ' yyyy年mm月dd日
        Case 5
            Format_Time = y & m & d    ' yyyymmdd
    End Select
End Function


' ====================================================================================================
' 检查字符串是否符合正则表达式
'Msgbox Join(RegExpTest( "[A-z]+-[A-z]+", "a-v d-f b-c" ,"Value"), VbCrLf)
'Msgbox RegExpTest( "[A-z]+-[A-z]+", "a-v d-f b-c" ,"Count")
'Msgbox RegExpTest( "[A-z]+-[A-z]+", "a-v d-f b-c" ,"")
Function RegExpTest(patrn, strng, mode)
    Dim regEx, Match, Matches      ' 建立变量。
    Set regEx = New RegExp         ' 建立正则表达式。
        regEx.Pattern = patrn      ' 设置模式。
        regEx.IgnoreCase = True    ' 设置是否区分字符大小写。
        regEx.Global = True        ' 设置全局可用性。
    Dim RetStr, arrMatchs(), i  :  i = -1
    Set Matches = regEx.Execute(strng)     ' 执行搜索。
    For Each Match in Matches              ' 遍历匹配集合。
        i = i + 1
        ReDim Preserve arrMatchs(i)        ' 动态数组：数组随循环而变化
        arrMatchs(i) = Match.Value
        RetStr = RetStr & "Match found at position " & Match.FirstIndex & ". Match Value is '" & Match.Value & "'." & vbCRLF
    Next
    If LCase(mode) = LCase("Value") Then RegExpTest = arrMatchs       ' 以数组返回所有符合表达式的所有数据
    If LCase(mode) = LCase("Count") Then RegExpTest = Matches.Count   ' 以整数返回符合表达式的所有数据总数
    If IsEmpty(RegExpTest) Then RegExpTest = RetStr                   ' 返回所有匹配结果
End Function


'===========================================================================================
'读写注册表
'读注册表
Function RegRead( strKey )
    On Error Resume Next
    Set wso = CreateObject("WScript.Shell")
    RegRead = wso.RegRead( strKey )    'strKey = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\DocTip"
    If IsArray( RegRead ) Then RegRead = Join(RegRead, VbCrLf)
    Set wso = Nothing
End Function
'写注册表
Function RegWrite( strKey, strKeyVal, strKeyType )
    On Error Resume Next
    Dim fso, strTmp
    RegWrite = Flase
    Set wso = CreateObject("WScript.Shell")
    wso.RegWrite strKey, strKeyVal, strKeyType
    strTmp = wso.RegRead( strKey )
    If strTmp <> "" Then RegWrite = True
    Set wso = Nothing
End Function


' ====================================================================================================
' 写文本日志
Sub WriteLog(str, file)
    If (file = "") Or (str = "") Then Exit Sub
    str = NowDateTime & "   " & str & VbCrLf
    Dim fso, wtxt
    Const ForAppending = 8         'ForReading = 1 (只读不写), ForWriting = 2 (只写不读), ForAppending = 8 (在文件末尾写)
    Const Create = True            'Boolean 值，filename 不存在时是否创建新文件。允许创建为 True，否则为 False。默认值为 False。
    Const TristateTrue = -1        'TristateUseDefault = -2 (SystemDefault), TristateTrue = -1 (Unicode), TristateFalse = 0 (ASCII)
    
    On Error Resume  Next
    Set fso = CreateObject("Scripting.filesystemobject")
    set wtxt = fso.OpenTextFile(file, ForAppending, Create, TristateTrue)
    wtxt.Write str
    wtxt.Close()
    set fso = Nothing
    set wtxt = Nothing
End Sub



' ====================================================================================================
' 程序控制
' 检测是否运行
Function IsRun(byVal AppName, byVal AppPath)   ' Eg: Call IsRun("mshta.exe", "c:\test.hta")
    IsRun = 0 : i = 0
    For Each ps in GetObject("winmgmts:\\.\root\cimv2:win32_process").instances_
        IF LCase(ps.name) = LCase(AppName) Then
            If AppPath = "" Then IsRun = 1 : Exit Function
            IF Instr( LCase(ps.CommandLine) , LCase(AppPath) ) Then i = i + 1
        End IF
    Next
    IsRun = i
End Function
' ----------------------------------------------------------------------------------------------------
' 检测自身是否重复运行
Function MeIsAlreadyRun()
    MeIsAlreadyRun = False
    If ((IsRun("WScript.exe",WScript.ScriptFullName)>1) Or (IsRun("CScript.exe",WScript.ScriptFullName)>1)) Then MeIsAlreadyRun = True
End Function
' ----------------------------------------------------------------------------------------------------
' 关闭进程
Sub Close_Process(ProcessName)
    'On Error Resume Next 
    For each ps in getobject("winmgmts:\\.\root\cimv2:win32_process").instances_    '循环进程
        If Ucase(ps.name)=Ucase(ProcessName) Then
            ps.terminate
        End if
    Next
End Sub


' ====================================================================================================
' 系统
' 检查操作系统版本
Sub CheckOS()
    If LCase(OSVer()) <> "xp" Then
        Msgbox "不支持该操作系统！　　　　", 48+4096, "警告"
        WScript.Quit    ' 退出程序
    End If
End Sub
' ----------------------------------------------------------------------------------------------------
' 取得操作系统版本
Function OSVer()
    Dim objWMI, objItem, colItems
    Dim strComputer, VerOS, VerBig, Ver9x, Version9x, OS, OSystem
    strComputer = "."
    Set objWMI = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
    Set colItems = objWMI.ExecQuery("Select * from Win32_OperatingSystem",,48)
    For Each objItem in colItems
        VerBig = Left(objItem.Version,3)
    Next
    Select Case VerBig
        Case "6.1" OSystem = "Win7"
        Case "6.0" OSystem = "Vista"
        Case "5.2" OSystem = "Windows 2003"
        Case "5.1" OSystem = "XP"
        Case "5.0" OSystem = "W2K"
        Case "4.0" OSystem = "NT4.0"
        Case Else OSystem = "Unknown"
                  If CInt(Join(Split(VerBig,"."),"")) < 40 Then OSystem = "Win9x"
    End Select
    OSVer = OSystem
End Function
' ----------------------------------------------------------------------------------------------------
' 取得操作系统预言
Function language()
    Dim strComputer, objWMIService, colItems, strLanguageCode, strLanguage
    strComputer = "."
    Set objWMIService = GetObject("winmgmts://" &strComputer &"/root/CIMV2")
    Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_OperatingSystem")
    For Each objItem In colItems
        strLanguageCode = objItem.OSLanguage
    Next
    Select Case strLanguageCode
        Case "1033" strLanguage = "en"
        Case "2052" strLanguage = "chs"
        Case Else  strLanguage = "en"
    End Select
    language = strLanguage
End Function

' ====================================================================================================
' 加密自身
Sub MeEncoder()
    Dim MeAppPath, MeAppName, MeAppFx, MeAppEncodeFile, data
    MeAppPath = left(WScript.ScriptFullName, InStrRev(WScript.ScriptFullName,"\"))
    MeAppName = Left( WScript.ScriptName, InStrRev(WScript.ScriptName,".") - 1 )
    MeAppFx = Right(WScript.ScriptName, Len(WScript.ScriptName) - InStrRev(WScript.ScriptName,".") + 1 )
    MeAppEncodeFile = MeAppPath & MeAppName & ".s.vbe"
    If Not ( LCase(MeAppFx) = LCase(".vbs") ) Then Exit Sub
    Set fso = CreateObject("Scripting.FileSystemObject")
    data = fso.OpenTextFile(WScript.ScriptFullName, 1, False, -1).ReadAll
    data = CreateObject("Scripting.Encoder").EncodeScriptFile(".vbs", data, 0, "VBScript")
    fso.OpenTextFile(MeAppEncodeFile, 2, True, -1).Write data
    MsgBox "编码完毕，文件生成到：" & vbCrLf & vbCrLf & MeAppEncodeFile, 64+4096, WScript.ScriptName
    Set fso = Nothing
    WScript.Quit
End Sub


' ====================================================================================================
' 初始化全局变量
Sub GetGloVar()
    WhoAmI = CreateObject( "WScript.Network" ).ComputerName & "\" & CreateObject( "WScript.Network" ).UserName  ' 使用者信息
    TmpDir = CreateObject("Scripting.FileSystemObject").getspecialfolder(2) & "\"                               ' 临时文件夹路径
    WinDir = CreateObject("wscript.Shell").ExpandenVironmentStrings("%windir%") & "\"                           ' 本机 %Windir% 文件夹路径
    AppDataDir = CreateObject("WScript.Shell").SpecialFolders("AppData") & "\"                                  ' 本机 %AppData% 文件夹路径
    StartupDir = CreateObject("WScript.Shell").SpecialFolders("Startup") & "\"                                  ' 本机启动文件夹路径
    MeDir = Left(WScript.ScriptFullName, InStrRev(WScript.ScriptFullName,"\"))                                  ' 脚本所在文件夹路径
    ' 脚本位于共享的目录时，取得共享的电脑名(UNCHost)，进行位置验证(If UNCHost <> "SerNTF02" Then WScript.Quit) ' 防止拷贝到本地运行
    UNCHost = LCase(Mid(WScript.ScriptFullName,InStr(WScript.ScriptFullName,"\\")+2,InStr(3,WScript.ScriptFullName,"\",1)-3))
End Sub
复制代码

hlzj88

使用vbs添加网络打印机  
根据实际环境更改打印服务器和打印机名称,此代码会在本地计算机上添加一个网络打印机,并设置为默认打印机,代码如下:

Set WshNetwork = CreateObject("WScript.Network")
WshNetwork.AddWindowsPrinterConnection "\\192.168.0.154\HP"
WshNetwork.SetDefaultPrinter "\\192.168.0.154\HP"

另存为print.vbs，当局域网内部哪一台电脑需要安装这个打印机只需要直接运行此脚本就可以安装好.

以上内容来自网络